Nespresso Troubleshooting Vertuo Next

Select another machine

Vertuo Next

First use or after a long period of non-use

First use or after a long period of non-use

  1. CAUTION: first read the important safeguards to avoid risks of fatal electrical shock and fire.
     
    NOTE: Please pair your machine and accept automatic software updates.
     
    CAUTION: please ensure ground continuity when plugging the machine in the power outlet.
     
  2. Rinse and clean the water tank and the lid before filling it only with fresh drinking water. Put the water tank in place and make sure it’s properly attached.
     
  3. Ensure the capsule container and the cup support (if necessary for the selected cup size) are in place. For your safety. operate the machine only with cup and capsule container in position.
     
  4. Plug in the power cord. For an optimized heating time. close and lock the machine to turn the machine ON.
    If the machine is already closed and locked. turn the machine ON by pressing the button.
     
    NOTE: to close the machine. push down the machine's head and turn the handle left to the lock symbol while maintaining pressure
     
     
  5. Light will blink while the machine is heating up. Steady light indicates the machine is ready. Place a container of at least 34 fl oz. / 1 L under the coffee outlet.
     
    Make sure no capsule is inserted during the cleaning process.
     
  6. Make sure that the machine is still locked. Press the button 3 times within 2 seconds to start cleaning and let the cleaning procedure complete automatically. It will take less than 2 minutes before start of the flow. The cup button will blink orange at a moderate pace during the process.
     
  7. This operation may take up to 7 minutes. The procedure can be stopped at any time by pushing the button. Once the cleaning is finished. a steady light will appear on the machine. In case you want to resume the cleaning process. push the button again.
     
    When interrupting the cleaning procedure. the machine may not stop immediately. Never open the machine during the cleaning procedure.
     
Coffee Preparation

Coffee Preparation

  1. Fill the water tank with fresh drinking water and place it into its position.
     
  2. For an optimized heating time. close and lock the machine to turn the machine ON.
    If the machine is already closed and locked. turn the machine ON by pressing the button.
     
  3. Light will blink while the machine is heating up. Steady light indicates the machine is ready.
     
  4. The factory settings for the coffee sizes are the following. Please make sure your recipient is big enough to prevent overflow.
     
    Alto: 14 fl oz. / 414 ml
    Mug: 7.77 fl oz. / 230 ml
    Gran Lungo: 5.07 fl oz. / 150 ml
    Double Espresso: 2.7 fl oz. / 80 ml
    Espresso: 1.35 fl oz. / 40 ml
     
  5. Adjust position in height of the cup support.The cup support has 3 positions and can be temporarily removed to accommodate various cup sizes. Make sure the cup support is properly secured.
     
  6. Unlock and open the machine head completely.
     
  7. This machine operates with Nespresso Vertuo capsules. Nespresso classic capsules cannot be used in this machine.
     
  8. Insert a capsule with the dome shape at the bottom. Be careful not to injure yourself on sharp points or trap your fingers when reaching inside the machine.
     
    NOTE: to avoid damaging the machine. use only fresh. unused capsules. Ensure previous capsule has been ejected before inserting a fresh one.
     
  9. Close the head and lock the machine by turning the handle left to the lock symbol on the machine head.
     
    NOTE: ensure that no capsules are lying on the machine top before closing the head. If capsules are lying they should be removed and the capsule container should be emptied.
     
  10. Place a cup of sufficient capacity under the coffee outlet. Risk of scalding may occur due to overflowing.
     
  11. Push the button to start the coffee preparation. It will take some time before the coffee flow comes out (due to barcode reading. coffee pre-wetting and infusion time).
     
    NOTE: the machine will automatically recognize the inserted capsule and select the coffee preparation parameters and cup length defined by Nespresso coffee experts to extract the coffee blend at its best.
     
    NOTE: you can do this even when the machine is still heating up. The coffee will then flow automatically when the machine is ready.
     
  12. To stop the coffee flow early. push the button.
     
    NOTE: when interrupting the coffee flow. the machine will not stop immediately.
     
  13. To manually top up your coffee. push the button and push again to stop when desired volume is reached.
     
    NOTE: top up can be activated only during 45 seconds after the end of the extraction.
     
  14. A steady light will appear once the brewing is finished.
     
    Please wait until coffee preparation is done to unlock the handle and / or switch off the machine. Turn the handle to the right and open the head to automatically eject the capsule.
     
    For hygienic matters. do not leave the machine open when not in use.
     
    NOTE: handle can warm up after several brewings in a row.
     
Energy Saving Concept

Energy Saving Concept

  1. The machine can be turned “OFF” at any time (when not operating) by holding the button for 3 seconds. Automatic “OFF” Mode: the machine will turn off automatically after 2 minutes of non-use.
Programming the water volume

PROGRAMMING THE WATER VOLUME

    1. The programming is specific to each capsule type. Alto. Mug. Gran Lungo. Double Espresso or Espresso. Cup sizes may be programmed from 0.7 fl oz. / 20 ml to 17 fl oz. / 500 ml.
       
    2. Open the machine head; insert the capsule you want to program; close the head; lock the machine.
       
    3. Light will blink while the machine is heating up. Steady light indicates the machine is ready.
       
    4. Push and hold the button until desired volume is reached.
       
    5. Water volume level is now stored for the capsule type used for the programming.
       
      NOTE: once a customer-specific volume is programmed by the user. every time that capsule type is inserted in the machine. the preparation will stop at the user-programmed cup size.
       
Cleaning

Cleaning

  1. Rinse and clean the water tank and the lid before filling it with fresh drinking water. Put the water tank in place.
     
  2. Rinse the cup support. Place a container of at least 34 fl oz. / 1 L under coffee outlet.
     
  3. Open the machine head and let the used capsule be ejected. Empty and rinse the capsule container and the drip tray.
     
  4. Close the head and turn handle left until “LOCKED” position.
     
    Please make sure no capsule is present in the machine before doing the cleaning.
  5. Light will blink while the machine is heating up. Steady light indicates the machine is ready.
     
  6. Wait for the machine to complete heating up. The light will be steady white. Push the button 3 times within 2 seconds. The cup button will blink quickly during the procedure. It will take less than 2 minutes before a flow comes out. The cleaning procedure will run automatically for 7 minutes. The cup button will blink orange at a moderate pace throughout the process.
     
  7. The procedure can be stopped at any time by pushing the button. The button will go to a steady light. In case you want to resume the cleaning process. push the button again. To brew a coffee. open the head and insert a capsule. then close. lock the machine by turning the handle left and push the button.
     
    CAUTION: do not use any strong or abrasive cleaning agent or solvent cleaner. Do not put in a dishwasher. Never immerse the appliance or part of it in water. Clean the coffee outlet regularly with a clean damp cloth. Please use only clean cloths for cleaning the machine.
Reset to factory settings

Reset to factory settings

  1. Open the machine head and let the used capsule be ejected. Machine must be on with steady light.
     
  2. Close the head. Leave the handle in “UNLOCKED” position.
     
  3. Push the button 5 times within 3 seconds. The button blinks 5 x orange and changes than to steady white.
     
Emptying the system before a period of non-use and en for frost protection. or before a repair

Emptying the system before a period of non-use and en for frost protection. or before a repair

  1. Empty the water tank and put it in place.
     
  2. Place a container under the coffee outlet.
     
  3. Unplug the power cord.
     
  4. Open the machine head and let the used capsule be ejected.
     
  5. Empty capsule container. the drip tray and the cup support.
     
  6. Close the head and turn handle left until “LOCKED” position.
     
  7. Push and hold the button while plugging the power cord. Release the button when the machine starts the emptying procedure. The button will blink orange quickly while the machine is emptying.
     
  8. It will take approximately 30 seconds for the machine to complete the emptying. Machine turns “OFF” automatically when machine is empty.
     
    CAUTION: caution should be exercised when plugging in the coffee machine with the button pressed. Small quantities of steam may emit from the machine as it evacuates the remaining liquids.
     
Descaling

Descaling

  1. NOTE: duration: approximately 20 minutes.
     
    NOTE: descale mode cannot be interrupted or exited. If the machine is unplugged during the descale procedure the machine will enter the Descale Mode upon start. Both cycles. descaling and rinsing. must be repeated after this.
     
    CAUTION: read the Safety Precautions on the descaling package. The descaling solution can be harmful. Avoid contact with eyes. skin and surfaces. Never use any product other than the Nespresso descaling kit available through Nespresso to avoid damage to your machine. For any additional questions you may have regarding descaling. please contact Nespresso.
     
  2. Empty the drip tray and the capsule container. then place back on the machine. Cup support can be removed during descaling.
     
  3. Fill the water tank with 1 unit of Nespresso descaling liquid and add 17 fl oz. / 0.5 L of water. then place back on the machine.
     
  4. For an optimized heating time. close and lock the machine to turn the machine ON.
    If the machine is already closed and locked. turn the machine ON by pressing the button.
     
  5. Blinking light indicates the machine is heating up. When the light is steady. the machine is ready.
     
  6. Open the machine head and let the capsule be ejected.
     
  7. Reclose the machine and leave the lever in "UNLOCKED" position. towards the front of the machine.
     
  8. Press and hold button until you see steady light turn off first. and then start blinking orange quickly. It may take approximately 7 seconds before light starts to blink.
     
  9. You now have 45 seconds to enter descaling mode by following Step 10. otherwise the machine will return to the ready for brewing coffee mode.
     
  10. Lock the machine by turning the lever left to the lock symbol and unlock by turning right. Press and hold the button until the light turns off and then starts blinking orange quickly again (approx. 7 seconds).
     
  11. Place a container (minimum 34 fl oz. / 1 L) under the coffee outlet.
     
  12. To start descaling. lock the machine by turning the lever left to locked symbol and push on the button. The machine will stop automatically when the first phase of descaling is completed. Light will blink orange quickly and continuously throughout descaling process.
     
  13. Empty and rinse water tank. drip tray and capsule container thoroughly.
     
  14. Fill the water tank with fresh drinking water. Place capsule container. drip tray and water tank back on the machine and place 34 oz container under the coffee outlet.
     
  15. When ready. push the button to rinse the machine. Machine will stop automatically when complete.
     
  16. The button will stop blinking rapidly and become steady. Descaling is completed. Allow the machine to dry for 10 minutes before using it. Discard rinsing water. refill the water tank and place on the machine.
     
  17. The machine is now ready for use.

Specifications

Weight 4 Kilogram
Removable water tank1 litre
Dimension (WxDxH) 14.2x42.9x31.4
1.5 bar pressure using Centrifusion™ at 7000 rpm
Automatic power offafter 9 mins
Used capsules container capacity10
Warranty2 years

Free delivery on all machines

Secure Online Payment

Recycle your used capsules

800 71175 for any advice